ОБОРУДОВАНИЕ СПУТНИКОВОЙ СВЯЗИ
SMW Dual PLL 9.75&10.6 LO ±10 КГц
два поддиапазона в одной поляризации одновременно
Статус: заказ
Гарантия: 36 мес.
Ku-Dual Band System- комплект из 2-выводного LNA и двух down-конверторов для верхней и нижней полосы Ku-band и одной поляризации. Стабильность ±10 КГц (±1.0 ppm). Заказ других сочетаний LO, выходы F, N, SMA.
ТОВАР ВРЕМЕННО НЕДОСТУПЕН
Информация для заказа
Скачайте xlsx-файл, выберите сочетание опций, сохраните изменения и приложите к заказу.
| Standard frequency range low band | 10.70-11.80 / 10.95-11.80 / 11.20-11.70 / 11.45-11.95 / 11.70-12.25 GHz |
| Standard frequency range high band | 11.70-12.75 / 12.20-12.75 / 12.25-12.75 GHz |
| Standard LO frequency low band | 9.75, 10.00, 10.25, 10.50, 10.60 and 10.75 GHz |
| Standard LO frequency high band | 10.60, 10.75, 11.20, 11.25 and 11.30 GHz |
| Output frequency | Depending on Frequency ranges and LO’s |
| Noise figure, typical | 1.0 dB |
| Spurious signals | -60 dBm typ. at the first spurious (e.g. 850 MHz with LO 9.75 & 10.60 GHz) |
| Gain typ. | 60 dB (55 dB min.) |
| Gain variation typical | ±4 dB within each band (See option) |
| ±0.4 dB within 30 MHz | |
| LO radiation | -60 dBm |
| Image rejection | 40 dB min |
| 1 dB gain compression point | +15 dBm |
| IP3 | +25 dBm |
| DC power LNA (sep.) | 12-24 V / 40 mA typ. |
| DC power for each BDC | 12-24 V / 280 mA typ. |
| Storage temperature | -40 to +80°C |
| Input flange LNA | WR-75 waveguide |
| Output LNA (waterproof) | SMA-connectors |
| Input BDC (waterproof) | SMA-connector |
| Output connector BDC (waterproof) | F-connector 75 ohm or N-connector 50 ohm |
| Input VSWR typ. | 2.3:1 |
| Output VSWR typ. | 2.0:1 |
| Weight LNA | 124 g |
| Dimension LNA | 81 x 40x 40 mm |
| Weight and dimension BDC F-connector | 174.3 mm (N-connector 180.3 mm) x 60 x 48.8 mm |
| Internal reference | |
| LO stability* (over temp.) | ±10 kHz (±1 ppm) or ±25 kHz (±2.5 ppm) |
| LO Phase noise typ. | -75 dBc @ 1 kHz |
| -85 dBc @ 10 kHz | |
| -90 dBc @ 100 kHz | |
| -120 dBc @ >1 MHz | |
| Options | |
| Ext. 10 MHz reference via separate input connectors | |
| Customized gain | |
| Sep. DC power input for the BDC´s | |
| Customized LO´s | |
| Customized cable length | |
| Flexible cables | |
| The standard system consists of: | |
| 1 pc LNA Dual Output SMA | |
| 2 pcs SMA-cables length 3 m (option flexible cables) | |
| 2 pcs Block Downconverters (BDC) | |
| 1 pc DC cable from Low band BDC to LNA | |