QUATTRO-PLL LNB с внешним вводом опорной частоты 10 МГц, с разъемом F или N
SMW Quattro-PLL type E | |
Frequency range Low & High | 10.70-11.70 & 11.70-12.75 GHz |
LO frequency | 9.75 GHz (Low band) 10.60 GHz (High band) |
Output frequency | 950-1950 MHz (Low band) 1100-2150 MHz (High band) |
Spurious signal in Low band in High band | -60 dBm typ. @ 1700 MHz -70 dBm typ. @ 1700 MHz |
General specification | |
Gain typ. | 57 dB (50 dB min.) |
Gain variation max. | ±4 dB/each band ±0.4 dB within 30 MHz |
Noise figure, typ. | 1.1 dB |
Image rejection | 40 dB min. |
P1dB typ. | +15 dBm |
IP3 typ. | +25 dBm |
Input flange | C120 (circular waveguide 18 mm) |
Cross polarization | 31.5 dB min. |
Operating temperature | -40 to +80°C |
Storage temperature | -40 to +80°C |
Output connectors (waterproof) | F-connectors 75 ohm or N-connectors 50 ohm |
Input VSWR typ. | 1.5:1 |
Output VSWR typ. | 2:1 |
Dimensions | 154 x 76 x 206 mm |
Weight | 1162 g (F-connectors); 1231 g (N-connectors) |
Current typ. | 260 mA @ +20 VDC 290 mA @ +18 VDC 320 mA @ +16 VDC 365 mA @ +14 VDC 370 mA @ +12 VDC |
Internal reference | |
LO stability | ±10 kHz (±1 ppm) -10° to +70°C (±2 ppm -40° to +80°C) or ±25 kHz (±2.5 ppm) -40° to +60°C (±3.5 ppm -40° to +80°C) Option: ±5 kHz (±0.5 ppm) -10° to +70°C (±1.5 ppm -40° to +80°C) |
LO Phase noise typ. | -75 dBc @ 1 kHz -80 dBc @ 10 kHz -90 dBc @ 100 kHz -120 dBc @ >1 MHz |
DC | 12-20 V on each polarization (on either Low- or High band output or on both outputs) |
External reference | |
LO stability (over temp.) | Depending on external reference |
External reference input frequency | 10 MHz |
External reference input power | -5 to +10 dBm on the High band output |
LO Phase noise typ. | -70 dBc @ 10 Hz -70 dBc @ 100 Hz -75 dBc @ 1 kHz -80 dBc @ 10 kHz -90 dBc @ 100 kHz -120 dBc @ >1 MHz |
DC | 12-20 V on the High band output (option Low band output) |
Options | |
Gain 52 dB typ. | |
Gain 50 dB max. (current +90 mA) | |
LO stability ±5 kHz (±0.5 ppm) | |
Enclosed accessories | |
O-ring |